- Joined
- 27 Jan 2014
- Messages
- 2
- Reaction score
- 0
- Country
Hi,
I have recently just replaced the thermostats and the heater element on the back of this appliance. After setting the control to cupboard dry the dryer came on and the element heated up but only one coil heated up, not sure if this matters. After around 30/40 mins of drying clothes it finished its cycle and removed clothes.
Now that I have come to put the second load in the drying orange light remains on once door has been closed and no heat is coming from element. I have tried selecting cooler setting, in fact I've tried all of them. I have looked through some forums on here and a lot seems to point out the relay on the pcb? I just wanted some more advice before I start clarting on with things. If anyone has came across a similar problem even a solution would be champion.
I have recently just replaced the thermostats and the heater element on the back of this appliance. After setting the control to cupboard dry the dryer came on and the element heated up but only one coil heated up, not sure if this matters. After around 30/40 mins of drying clothes it finished its cycle and removed clothes.
Now that I have come to put the second load in the drying orange light remains on once door has been closed and no heat is coming from element. I have tried selecting cooler setting, in fact I've tried all of them. I have looked through some forums on here and a lot seems to point out the relay on the pcb? I just wanted some more advice before I start clarting on with things. If anyone has came across a similar problem even a solution would be champion.
