I am looking at buying a pallet (approx 7.0m2) of Black Basalt Flamed 600 x 200 x 50mm tiles, it's drastically reduced and seems to be exactly what I need to fill 1.4m either side of an internal wall made up of concrete bricks into an internal corner with a height of 2.4m. and will provide the backdrop for a wood burning stove.
However I am not a tiler, I have dabbled with O.K. results in one or two of our previous bathrooms.
I love the look of the tiles, the price is good, but it's the 50mm thing
My query is:
1st...are these too big for wall use?
2nd...if not, what adhesive would you recommend?
and 3rd...am I getting ideas above my station taking on a job of this size, or if I take my time and follow the rules is it DIY doable. If it is, are there any tips that you can offer or any pitfalls that I should be mindful of.
Thanks for any and all input.
However I am not a tiler, I have dabbled with O.K. results in one or two of our previous bathrooms.
I love the look of the tiles, the price is good, but it's the 50mm thing
My query is:
1st...are these too big for wall use?
2nd...if not, what adhesive would you recommend?
and 3rd...am I getting ideas above my station taking on a job of this size, or if I take my time and follow the rules is it DIY doable. If it is, are there any tips that you can offer or any pitfalls that I should be mindful of.
Thanks for any and all input.