I am contempaling fitting one of the flat backed 'back to wall' bidets but I am at a loss to figure out how to plumb the waste onto it given that once it is installed 'back to wall' there is no access to the plumbing. I am presume the hot and cold feeds can be achieved using flexible piping but the waste, trap etc has me baffled.
How do I plumb waste on a back to wall bidet
- Thread starter ashtons99
- Start date
Sponsored Links
- Joined
- 13 Apr 2006
- Messages
- 150
- Reaction score
- 0
- Country
All of the pipework will come through the wall, If you havent already a bidet in situ you will probably need to rip out the old plasterboard to pipe and then replasterboard and plaster after. You would know where to put the pipework by measuring the inlets and outlets on the bidet.
If access is a problem, you can always fit access panels behind the bidet which are in effect a false wall.
If access is a problem, you can always fit access panels behind the bidet which are in effect a false wall.
Sponsored Links
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
