I want to get my alarm working after it has been disconnected for the last four years due to extensive refurbishment, and before I reconnect the mains power I would be grateful for a bit of advice on a few points i`m unsure about:
a) The system had 2 pir`s and 1 mag switch. The mag switch is`nt needed any more as it was on a dodgy door that has since been replaced. The cable is still connected to the control box but how do I terminate this cable to make it in-operable or not give any probs?
b) The backup battery was new in 2005. Would it still be usable? Is there also a battery in the external sounder that might need replacing?
The system is a Gardiner Gardtech 360/580.
Apologies if this post is on the long side. If i`ve missed any necessary info for the informed please let me know.
a) The system had 2 pir`s and 1 mag switch. The mag switch is`nt needed any more as it was on a dodgy door that has since been replaced. The cable is still connected to the control box but how do I terminate this cable to make it in-operable or not give any probs?
b) The backup battery was new in 2005. Would it still be usable? Is there also a battery in the external sounder that might need replacing?
The system is a Gardiner Gardtech 360/580.
Apologies if this post is on the long side. If i`ve missed any necessary info for the informed please let me know.