Finally managed to get the bath sealed properly but the glass screen is still leaking around the hinge. The base of the hinge has a gap between the bath so I sealed the inside. I know that's not recommended but I didn't want to risk water getting under the hinge and going down the back of the bath as the plasterboard is already getting a bit damaged.
I think it's leaking from the gap between the hinge and the glass screen. I've tried blocking that gap with silicone and replaced the seal at the bottom. I cut part of the seal clamp out so I could push it further over into the gap but still not able to get it water tight.
Any suggestions on what to do? Planning to get a large syringe and squirt small areas to try and pinpoint the leak but wondered if there's something else I should be doing. Seal it from the outside and squirt a copious amount underneath the hinge?
I think it's leaking from the gap between the hinge and the glass screen. I've tried blocking that gap with silicone and replaced the seal at the bottom. I cut part of the seal clamp out so I could push it further over into the gap but still not able to get it water tight.
Any suggestions on what to do? Planning to get a large syringe and squirt small areas to try and pinpoint the leak but wondered if there's something else I should be doing. Seal it from the outside and squirt a copious amount underneath the hinge?