How would you tackle floor issue?

Joined
16 Nov 2026
Messages
4
Reaction score
0
Country
United Kingdom
We had an old window and wall removed and this has left us with a line of bricks a fair bit higher than current floor.

We are ripping up the old laminate floor and laying a new flooring as soon as possible.

How can we make this floor good to be able to lay some new laminate floor upto the door.

Chipping brick away by hand to old floor height and self leveling or levelling old floor with brick line.
Trying to keep fairly easy DIY wise and not make a massive mess.

PXL_20261115_090311031.jpg
 

Attachments

  • PXL_20261115_094107763.jpg
    PXL_20261115_094107763.jpg
    332.2 KB · Views: 22
  • PXL_20261115_090246341.jpg
    PXL_20261115_090246341.jpg
    201.5 KB · Views: 22
Take the top brick out. It shouldn’t be there. Then fill back up level to sub floor with a compound like Ardex an , fball 1200 and granno chips with a visqueen sheet up the doorframe
So you think its best to use something like a hammer drill and take that brick out. Then fill is as you suggest. trying to make as little mess as possible.
 
The mortar should be fairly soft around the bricks so a club hammer and bolster should suffice. Then fit a dpc, bed of mortar and joist in that order so the whole thing is at or just below the level of the prepared floor
 
So good progress for me today. Bricks removed and nothing broken.

So do I need to take time to clear out all the broken bits of brick , mortar etc before I fill it in ?

With some of the raised bits of old floor I should I hack them down as best I can before filling the gap ?

The visqueen sheet should basically go between the new door and new mortar?

I mix up the fball 1200 and granno chips fill up to 5mm below old floor level.

Later on I use the Ardex an to top up to old floor level and level out to old floor ?

PXL_20261117_142322537.jpg


Hack these raised bits down with something

PXL_20261117_142339581.jpg
 

Attachments

  • PXL_20261117_142339581.jpg
    PXL_20261117_142339581.jpg
    367.7 KB · Views: 4
Yeah take loose bits out. Fill in with visqeen sheet so no damp can get in through the bricks. You don’t need to buy different screeds. Just buy 1200pro or Bostik advanced or Ardex Na or Mapei NA
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top