Hi all,
Looking for advise on Wallstar.
Hot water used to work when tap was turned on half but now it seems I have throw tap onto full to shock hot water into action or it will just flow cold.
I suspect diaphragm is getting worn, but if anyone out there in the know could help before I rip the boiler down I would be very grateful.
Thank you
John
Looking for advise on Wallstar.
Hot water used to work when tap was turned on half but now it seems I have throw tap onto full to shock hot water into action or it will just flow cold.
I suspect diaphragm is getting worn, but if anyone out there in the know could help before I rip the boiler down I would be very grateful.
Thank you
John