IGNORE - IKEA Door / Hinge alignment on Metod 1m high wall cabinet

[ETAF]

IGNORE - didnt see the middle screw to adjust the height

I thouight is was the hinge fixing screws - COOL - now all sorted

we have just fitted 3 IKEA 1m high wall cabinets - sitting on a worktop
the 60cm wide cabinet with 2 30cm doors - 1 door is quite higher 0 I have tried to move the hinges down - BUT there does not seem to be any adjustment or movement

anyone had this experiance and how resolved

as its just a utility room, we are not that bothered - BUT i do want to fit the knobs and then i will have to put it on lower on the door - so the knobs are all in a line

 

[opps]

If one door is higher, why not return it? Or have I miss read your post?

 

[ETAF]

If one door is higher, why not return it? Or have I miss read your post?

misread the post - it was the adjustment - I thought it was the mounting screws had to be removed and the hinge moved - like lots of other hinges i have used

BUT there is a middle screw which adjust the door height - SO all fixed now

 

[opps]

Glad you got it sorted- looks good.

 

[ETAF]

- looks good.

Thanks - i added it to "Your Projects" forum- as a WIP and will finish when complete - lots left to do

utility room

Just working on refurb of what we use as a utility room - still WIP room is 2.5m x 5.8M I fitted a new floor to make level with the house (66/67mm ) - 40mm insulation - 22mm flooring - vinyl about 4/5mm we then fitted out with ikea kitchen cabinet's I got the wrong radiator size - I...

www.diynot.com