Measure where it is stored, at the top of the cylinder, which is where the Legionella will form. Tuck a thermometer under the insulation, tight against the metal of the tank. Record it at the time the 'stat clicks off.
Immersion heater thermostat unresponsive
- Thread starter DIY10291
- Start date
Measure where it is stored, at the top of the cylinder, which is where the Legionella will form. Tuck a thermometer under the insulation, tight against the metal of the tank. Record it at the time the 'stat clicks off.
Sponsored Links
27.203p Kwh 9Kw electric shower run for 3 minutes = 12.241p
Assume a full cylinder of hot water is needed for a bath - cylinder takes 90 minutes to heat up, with 3kw element = 122.41p or £1.22
Cost is around 1/4 to 1/3, if gas heated.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
Similar threads
