- Joined
- 18 Jan 2009
- Messages
- 3
- Reaction score
- 0
- Country
Hi All,
I have an Indesit w/m which has worked perfectly for 7+ years. It recently stopped in mid prgramme just before rinse/spin cycle (drum still rotating slowly). After emptying and draining I checked and cleaned filter, pump and hoses and now machine won't even fill with H or C water on any programme setting and there is a whirring noise (sounds like the pump running with no water) when spin cycle selected.
Checked the motor brushes and there is about 6 or 7mm left on the shorter side and no sign of arcing or burning. When a wash programme is selected (the power light is on and there is water at both infill points) the door can still be opened although I guess this may be normal.
Any help/suggestions greatly appreciated.
Rob
I have an Indesit w/m which has worked perfectly for 7+ years. It recently stopped in mid prgramme just before rinse/spin cycle (drum still rotating slowly). After emptying and draining I checked and cleaned filter, pump and hoses and now machine won't even fill with H or C water on any programme setting and there is a whirring noise (sounds like the pump running with no water) when spin cycle selected.
Checked the motor brushes and there is about 6 or 7mm left on the shorter side and no sign of arcing or burning. When a wash programme is selected (the power light is on and there is water at both infill points) the door can still be opened although I guess this may be normal.
Any help/suggestions greatly appreciated.
Rob