- Joined
- 6 Dec 2004
- Messages
- 17
- Reaction score
- 0
- Country
Ok, when attempting to run any wash programme, the machine starts to fill, but will not get past this point. No lights flash, normal indicators are illuminated, but the drum does not rotate, and it's possible to hear some initiating clicks inside the machine.
It's still possible to open the door as long as a drain cycle has been run after filling.
Does this point to any specific areas for further investigation? This fault has occurred without warning following normal usage.
It's still possible to open the door as long as a drain cycle has been run after filling.
Does this point to any specific areas for further investigation? This fault has occurred without warning following normal usage.