Inline fan and LED strip light recommendations

Joined
28 Jun 2019
Messages
29
Reaction score
0
Country
United Kingdom
Hi,

Getting very confused with all the various options, and was wondering if anyone can recommend items that are good.

I am after an inline fan for a small bathroom with timer that is quiet but not an extortionate price!

Also looking for led strip lights for kitchen under cupboards, they have to go only about 2m but have to go through 3 right angles, so any strips that are easy to do this and dont drop in brightness through the angles.

Thanks
 
Sponsored Links
The Lidi 2 meter smart light seemed good quality, bright and seemed well protected, the 5 meter lights from screwfix seemed feeble in comparison but as a result I could get them round corners, and in use very little in them, Lidi zigbee and screwfix direct but in use had to tell the diffrence.

Not much in the price either, but few people buy enough to compare, but not real complaints about the TCP colour changing smart lights from Sscrewfix, and flimsy enough to get around corners.
 
1680157589551.png

The left and right pairs are using TCP lighting from screwfix, and the centre one Livarno Lux from Lidi, the TCP we could better fold to take the corners to the Livarno, but the Livarno seemed better quality.

Normally the lights set to pink on very low output, but setting to white and output turned up they can light the whole room, but the Livarno one the colour temperature is adjusted by having two stings of LED's one low colour temperature and one high, and very visible that there are two LED's, but the TCP one you can't see that there are two LED's so it seems to be lit from one string of LED's although likely still two being used.

Turned to colour it used again different LED string, at £25 each for the TCP lamps, it is not cheap, there is around £75 worth of lights there, had I used non smart it would have been cheaper, but we rarely use them at full output, it would be around 56 watt, which is normally too much for cabinet lighting, so it needs to have the ability to turn down output.

Also in the past we have fitted display lights, then after the first few months, never used, but being smart we can have them on timers, or voice control, so they tend to be used more.
 
Last edited:

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top