Hi,
I purchased the netatmo thermostat and have been trying to install.
Initially I removed my very old wired Mechanical Thermostat in the front room and there were only 2 small white wires connected - I removed the old thermostat and wired up the new one however when turning the heating to off or max temp neither of these stopped or started the boiler so I presume the old thermostat didn't work and to be honest we never really felt the heat change when we used it.
I then looked at the second option of attaching the boiler adaptor directly to my boiler but am really not sure which wires go where as my boiler is very old and is a Potterton Profile 80e.
Would it be possible to take a look at the attached images and please advise.
I purchased the netatmo thermostat and have been trying to install.
Initially I removed my very old wired Mechanical Thermostat in the front room and there were only 2 small white wires connected - I removed the old thermostat and wired up the new one however when turning the heating to off or max temp neither of these stopped or started the boiler so I presume the old thermostat didn't work and to be honest we never really felt the heat change when we used it.
I then looked at the second option of attaching the boiler adaptor directly to my boiler but am really not sure which wires go where as my boiler is very old and is a Potterton Profile 80e.
Would it be possible to take a look at the attached images and please advise.