Installing Aco channel drain.

Joined
16 May 2021
Messages
93
Reaction score
0
Country
United Kingdom
Hi everyone,

I'm building a patio from Indian sandstone slabs and have planned to install an Aco RainDrain channel drain at one end of it (see drawing). The fall is 1:80 towards the drain. The drain will be about 3.3m long. My question is do I need to have a fall on the aco drain? I wasn't planning to have a fall across the patio only towards the drain. Can someone give some advice on how this should be done? I guess I could put a small fall on the drain itself and not the patio??

Many thanks,

Ed

Aco Drain.PNG
 
Sponsored Links
Recommended fall over 3m is 15mm and 20mm on 4 metre run, so a fall of 20mm will be adequate for the ACO drain.
I would still put a fall on the patio towards the drain side.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top