-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Installing automatic bypass
- Thread starter robmorgan
- Start date
Job done = no more overrun noise 
Thanks guys.
Drained from the boiler as suggested into a new/clean bucket which I then popped back in the expansion tank so as not to lose any inhibitor.
I've set the bypass to 0.2 bar. Tried dialling it up while feeling for the pipe to warm up but then the CH turned off (forgot to set stat higher) and of course the bypass kicked in and got hot whatever the setting was at the time!
I gather 0.2 bar is "typical"? Do I need to be any more scientific with it?
Thanks guys.
Drained from the boiler as suggested into a new/clean bucket which I then popped back in the expansion tank so as not to lose any inhibitor.
I've set the bypass to 0.2 bar. Tried dialling it up while feeling for the pipe to warm up but then the CH turned off (forgot to set stat higher) and of course the bypass kicked in and got hot whatever the setting was at the time!
I gather 0.2 bar is "typical"? Do I need to be any more scientific with it?
Attachments
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
