Intergas F0 Fault code

[sebeye]

Hi

I had a intergas xtreme 36 installed a few week ago and all has been going ok until I suddenly got a F000 fault flash up on the boiler.

I cleared the code, and the boiler seemed fine, however its now come up again and I've also
had a F014 code.

The radiators have all been bleed, plus on top of the boiler.

Trying to get a hold of intergas but been put on hold for 30 min plus.

Does anyone have any suggestions?

Thanks

 

[Dan Robinson]

Check your system pressure and that the boiler is bled (from the top bleed point).

Beyond that, you'll need to get the installer back or get hold of Intergas.

To fault find further will mean case off time.