• Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.

Ive Got No Hot Water!!!

Joined
17 Dec 2008
Messages
3
Reaction score
0
Location
Leicester
Country
United Kingdom
I have a concord WRS Boiler,

Woke up this morning to find no hot water, after trying a few things I find that the boiler is working as the radiators are all working.

Any ideas what might be up??

Thanks
 
Assuming your problem is cold water at the hot taps - you may have a dry header tank (ball valve stuck), motorised valve not opening, air-lock etc
 
You will need to check the thermostat on the cylinder, and/or the 2/3 port valve.
 
with all due respect, if you dont know how to do these basic checks I would have to say call in a pro.
 
ok love to say i knew how to check those things....

Ok, if one of the above ie, motor on valve has gone it isnt a very expensive repair.
Ask friends or family if they can recommend a reliable plumber or gas engineer.

Do you not have the immersion heater for backup until repaired.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top