Jaguar 23kw combi boiler HELP!

Joined
28 May 2013
Messages
1
Reaction score
0
Location
Clwyd
Country
United Kingdom
Hi there,

I am no heating expert but i have a Jaguar 23kw wall hung combi boiler. I have no heating but i have hot water.

I replaced the diverter valve diaphram a month ago due to having no hot water and it splitting, now i have no heating. Could this be the same problem?

Pressure is fine at 1.4 bar.

Can someone please help as this boiler is in my garage and supplies my tenants bungalow attached to my house.

Kind Regards
 
Sponsored Links
Check the mode selector on the boiler. It could be set low tempreture on c/h put it up to at least 60 degrees. if this is ok check time clock or roomstat
 
I really think that if the boiler supplies tenants then you should call a heating engineer to it,

I expect its a very simple problem to solve!

Tony
 
I really think that if the boiler supplies tenants then you should call a heating engineer to it,

I expect its a very simple problem to solve!

Tony

It is a DIY forum, not a GasSafe referral site.
 
Sponsored Links
Hi, I noticed you said you had changed the diaphragm, could you tell me where you got it from please?

I have the same problem with the same boiler, did you get it sorted? I am thinking I will end up with a new valve but, like everyone, cash is tight!

Any advice appreciated (on the boiler issue or the lack of cash!!)

Stu
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top