joining worktops in blind corners

[zmpart]

Greetings

I have a u shaped kitchen that has two blind corners on the bottom units as we bought a second hand kitchen due to cost and reworked the units to fit the space we have. The problem I am discovering now is that when i go to install and join the 3 pieces of worktop, both 90 degree connections are within the blind corners and I am unable to access from below the bottom side of the worktops to bolt them together. I am using joining strips (i know, i know!!) and need to find how best to install these worktops. Any advice, suggestions or help is greatly appreciated.

Thanks
Zac

 

[foxhole]

The cup's cannot fit so close together as to create blind corners or the doors will not open or bind with each other at the corners.?

 

[zmpart]

Yes, the lower units doors all work fine as the units are connected with a corner post that allows them to open fine. I think i realize i may be able to connect the bolt and secure them properly albeit with some difficulty. Thanks for taking the time to respond and I am still interested in any other suggestions any one else may have.

 

[gregers]

post a pic of what your trying to achieve.