kalirel heater

[bigal66]

hi, i am thinking of getting the above heater for the living room (1260w)it requires to be wired to a 5-10 or 13 amp fused spur.it will sit next to a single socket can i 1) just replace the socket with a fused one 2) fit a dual socket and keep my single socket with the fused spur connected to it ,cheers bigal

 

[securespark]

5, 10 or 13A

Which is it?

It is intended to be wired to a fused spur.

Is it, or does it have a plug on?

 

[bigal66]

hi,instructions on the web site says "The radiator electrical connection must be carried out in a standardized fuse spur, fuse spur programmer (5- 10 or 13 amps)."cheers bigal

 

[securespark]

Speak to the manufacturer's technical department to clear this up.

What size heater is it?

 

[bigal66]

heater is 1250w ,no plug ,must be wired into a fused spur,cheers bigal[/img]

 

[securespark]

Sorry, you said that.

Did you manage to get through?

 

[bigal66]

will send an email to them

 

[bigal66]

assuming it has to be connected to a 13 Amp Switched Spur with Flex Outlet will i be able to run a spur from my single socket thanks again ,bigal