I have a Kenwood KVT1W Tumble Dryer two of the resistors are burnt out the tumble dryer works but you have to keep the on button pressed. On my ohm meter I selected 200K and the reading i got displayed on my meter from the two resistors was 32 does this mean that the two resistors i need are 32 kilo ohms?
Kenwood KVT1W
- Thread starter paul161201
- Start date
Sponsored Links
If the resistors are blown (if that is what they are, there is usually a screen print next to the component) you measuring them will mean nothing (after all if they are blown how can you get a reading). You can not really test resistors while they are still on PCB's due to multiple paths and layers.
You need to know what the colour bands are on the component.
You need to know what the colour bands are on the component.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
