Kitchen tap not hot enough (Ed.)

Yes it will work fine ,but don't expect the same pressure that your large pump delivers. You would probably get around 6 or 7 litres per minute flow from the booster.
What do you get now from kitchen hot tap ? Run it on full for one minute ,into a container, and measure how many litres are in the container.
can you link me exactly what I neeed to buy - its lots of them there
 
750 ml per hour, think you mean per minute ?
If I recall it's the SP2 that you need ,I will check.
It's the SP2B that you need
 
Last edited:
Could this pump be a solution ?


Appreciate your help
That's similar to one I used in my daughters flat for same problem .
Your pipe coming out of the top of the cylinder should angle upwards to prevent air locks .What's above cylinder ?.
If your not sure how to do this then a plumber would be your best call .
 
So I can buy that pump and I will replace it right ? - Above the cylinder is just storage shelf - lots of room.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top