Leaking lockshield valve
- Thread starter Sam23900
- Start date
Sponsored Links
- Joined
- 8 May 2017
- Messages
- 9,399
- Reaction score
- 2,337
- Country
Fit a new valve.
Sponsored Links
Just replace it.
Andy
Andy
My guess - you might be able to get and fit a tap refurb kit, instead of the whole valve.
Have you tried tightening the gland nut?Got water dripping out of the lockshield valve on a towel rail. Only way to stop it is to fully close the valve, and so turn the radiator off. Anything I can try, or will it need a new valve?
- Joined
- 8 May 2017
- Messages
- 9,399
- Reaction score
- 2,337
- Country
It doesnt have a gland nut !
There's usually a male threaded piece (called a gland) which goes over the valve stem and screws into the body, with hexagon for tightening. Beneath it there is gland packing, tightening the gland compresses the packing on to the stem and stops leaks. But I can't see the hexagon for sure on your photo, so possibly it's a different type.
OK as I said I wasn't sure from the pic, but having magnified it I see. Is that just a circlip I can see?
- Joined
- 21 Feb 2021
- Messages
- 15
- Reaction score
- 1
- Country
Thanks for the explanation. To be honest, that's what had confused me. The advice from Google suggested tightening the gland nut, but I couldn't see how that related to my valve. It seems there isn't one, so will get a new valve sorted. Thanks all
- Joined
- 21 Feb 2021
- Messages
- 15
- Reaction score
- 1
- Country
Yes, believe it is
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
