What are the current regs for the maximum length of a radial circuit using 2.5mm T&E.
I have one in my loft that serves 5 loads (4 sockets and 1 FCU), in total using no more than 1000 watts. It is connected to the RCD side of the CU.
It is not covered by anything but does run next to other cables at times. It is about 25m long.
Is this safe?
And if so what rating MCB should it have?
I have one in my loft that serves 5 loads (4 sockets and 1 FCU), in total using no more than 1000 watts. It is connected to the RCD side of the CU.
It is not covered by anything but does run next to other cables at times. It is about 25m long.
Is this safe?
And if so what rating MCB should it have?