- Joined
- 15 Aug 2023
- Messages
- 1
- Reaction score
- 0
- Country
Hi all hope someone can help.
I’ve lined over thermal liner. I sized the thermal liner before I applied lining paper but the edges are lifting. As soon as I apply any paint the lining paper expands re-closing the joints before drying back and pulling the joints apart. I’ve tried filler but that seem to push out and crack when paint dries over it.
I’ve run out of ideas now. There must be a fix for this. Job will be a complete write off if I have to strip and start again.
I’ve lined over thermal liner. I sized the thermal liner before I applied lining paper but the edges are lifting. As soon as I apply any paint the lining paper expands re-closing the joints before drying back and pulling the joints apart. I’ve tried filler but that seem to push out and crack when paint dries over it.
I’ve run out of ideas now. There must be a fix for this. Job will be a complete write off if I have to strip and start again.