Looking for correct espag window handle

Discussion in 'Windows and Doors' started by AndyC68, 27 Dec 2021.

  1. AndyC68

    AndyC68

    Joined:
    15 Nov 2015
    Messages:
    7
    Thanks Received:
    0
    Country:
    United Kingdom
    Hi, got a couple of espag window handles to replace - just want to make sure I get the correct ones

    Here's the old handle

    [​IMG]

    [​IMG]

    It's a 15mm spindle

    Will these work? If not would appreciate a link to the right ones.

    Cheers
     
  2. AndyC68

    AndyC68

    Joined:
    15 Nov 2015
    Messages:
    7
    Thanks Received:
    0
    Country:
    United Kingdom
    Or I could just bring the handle into the shop and ask them, I guess. Maybe they're all interchangeable and I'm overthinking it.
     
  3. Sponsored Links
  4. crank39

    crank39

    Joined:
    1 Dec 2009
    Messages:
    5,056
    Thanks Received:
    896
    Location:
    South Yorkshire
    Country:
    Barbados
    99.9% of espags are interchangable and hole centres are the same, the main difference is the spindle length, it all depends where the mechanism is situated within the profile, some are close to the inner face so spindles only need to be short, others the mechanism is closer to the outside face and you need a longer spindle to reach it, some handle manufacturers include a packet of 5 different length spindles which you can swap out and are magnetic while others just put a 50mm spindle in and the customer cuts it to length themselves, it really is just as simple as hacksawing of what you don't need
     
  5. AndyC68

    AndyC68

    Joined:
    15 Nov 2015
    Messages:
    7
    Thanks Received:
    0
    Country:
    United Kingdom
    Ta, I know the spindle length so it sounds like the one I linked to should be okay.
     
    • Like Like x 1
  6. Sponsored Links
Loading...

Share This Page