Low pressure kitchen tap.

[clayton]

Hi I need a new tap for my kitchen, the cold feed is mains and the hot supply from the
copper tank on the first floor, I'm finding it vey difficult to find a low pressure tap that I like
or is the correct size and style.

I know this says its not suitable for low pressure but as its 0.3 bar would it work ?

Thanks.

https://www.banyo.co.uk/franke-eos-neo-stainless-steel-pull-out-kitchen-tap.html

 

[HERTS P&D]

Don't get a pull down tap!

Type this number into screwfix: 4648G

Andy

 

[clayton]

Don't get a pull down tap!

Type this number into screwfix: 4648G

Andy

Thanks for the link Andy but I'm looking for a side mounted control tap, the one I have now has the levers that pull forward and every time I try to fill a bucket it knocks the levers and turns the water off.

 

[HERTS P&D]

Try these code numbers:

10701

6236T

1301V

Andy

 

[clayton]

Now I've seen this one but it says Suitable for High & Low Pressure Systems but also this Not Suitable for Gravity-Fed Systems..confused

https://www.screwfix.com/p/grohe-st...el/6236t#product_additional_details_container

 

[clayton]

Thanks Andy I might go for the 6236T.