Mac Allister MMIS210S-B Mitre Saw cutting width?

[Rapidonset]

I need to buy a cheap and cheerful mitre saw to make some fencing . Once finished, the saw will be given to my lad in case he finds a use for it.

The B&Q Mac Allister MMIS210S-B is perfect for what I want. However, it is about the only sliding mitre saw I have seen that doesn't state the cutting width?

Does anyone have this saw and able to confirm if it will cut more than 300mm ?

 

[jj4091]

Given the dimensions I would guess at 300 mm but could be less https://www.trade-point.co.uk/depar...Ds577-21qYQdDFAXEf-s1rhXY31ahJnP4Qm-KfdH9HJB0

 

[SFK]

For that application my I suggest the following (that i use for firewood)..
It is £10 cheaper and SF are easier to get replacement if it fails under warranty.

Cross Cut: 60 x 310mm

https://www.screwfix.com/p/titan-ttb794msw-210mm-electric-single-bevel-sliding-mitre-saw-240v/881KP?

 

[Rapidonset]

For that application my I suggest the following (that i use for firewood)..
It is £10 cheaper and SF are easier to get replacement if it fails under warranty.

Cross Cut: 60 x 310mm

https://www.screwfix.com/p/titan-ttb794msw-210mm-electric-single-bevel-sliding-mitre-saw-240v/881KP?

That was the other Mitre Saw I was looking at because of its 310mm cut. I thought the double bevel in the Mac would come in handy for my lad for his house, plus I get a healthy discount from B&Q, so the cost of the Mac would come in under £80. Just surprised the cutting width isn't listed. Like @jj4091 , I figured it to be around 300mm from the other specs.