Looks like a 9200 Scantronic.
You can get the manuals from ukpanels.
Looks like a 9200 Scantronic.
You can get the manuals from ukpanels.
9200 - USER Changing Code
Press 6
Press ENT
Enter Existing User Code
Enter New User Code
Press ENT
Duh, believe it or not, that is why I included it in the instructions.Looks like a 9200 Scantronic.
You can get the manuals from ukpanels.
9200 - USER Changing Code
Press 6
Press ENT
Enter Existing User Code
Enter New User Code
Press ENT
its really important to remember that last ENT.
Duh, believe it or not, that is why I included it in the instructions.Looks like a 9200 Scantronic.
You can get the manuals from ukpanels.
9200 - USER Changing Code
Press 6
Press ENT
Enter Existing User Code
Enter New User Code
Press ENT
its really important to remember that last ENT.
Na, you just like the sound of your fingers on the keyboard.Duh, believe it or not, that is why I included it in the instructions.Looks like a 9200 Scantronic.
You can get the manuals from ukpanels.
9200 - USER Changing Code
Press 6
Press ENT
Enter Existing User Code
Enter New User Code
Press ENT
its really important to remember that last ENT.
and ........................?
the number of times i`ve been called out to reboot due to customers forgetting it, makes it worth mentioning twice ............
Na, you just like the sound of your fingers on the keyboard.Duh, believe it or not, that is why I included it in the instructions.Looks like a 9200 Scantronic.
You can get the manuals from ukpanels.
9200 - USER Changing Code
Press 6
Press ENT
Enter Existing User Code
Enter New User Code
Press ENT
its really important to remember that last ENT.
and ........................?
the number of times i`ve been called out to reboot due to customers forgetting it, makes it worth mentioning twice ............
thank you all for your replies, after a power cut due to electrical work carried the day and p/a light on how do i exit this mode ?
//media.diynot.com/129000_128719_18012_42800159_thumb.jpg[/QUOTE]
what happens when you try entering the code?
//media.diynot.com/129000_128719_18011_27523050_thumb.jpg
//media.diynot.com/129000_128719_18012_42800159_thumb.jpg[/QUOTE]
Hi
I have a series 1000 alarm and need to change the code- did the instructions you were given work?
Regards
Alison
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local