- Joined
- 27 Jan 2008
- Messages
- 27,408
- Reaction score
- 3,309
- Location
- Llanfair Caereinion, Nr Welshpool
- Country
I swapped RCBO in my consumer unit, test button bottom instead of top, so easy not to realise they are all RCBO's with odd one out. New one duel pole switching bi-directional type A old are all type AC.
I had one lot of tripping for one ring final, and never did find the problem. Iit stopped tripping after unplugging loads, but did not start again when all plugged back in again, and the clamp on and RCD tester showed no faults.
I was just about at the stage where I would need to split ring to test, unplugged dish washer and tripping stopped so thought that was the problem, but thought I would just try it again and it did not trip.
Finding a fault can be a real pain. I have got a feeling my tripping down to faulty surge protection device in an extension lead, but no way to prove it.
I had one lot of tripping for one ring final, and never did find the problem. Iit stopped tripping after unplugging loads, but did not start again when all plugged back in again, and the clamp on and RCD tester showed no faults.
I was just about at the stage where I would need to split ring to test, unplugged dish washer and tripping stopped so thought that was the problem, but thought I would just try it again and it did not trip.
Finding a fault can be a real pain. I have got a feeling my tripping down to faulty surge protection device in an extension lead, but no way to prove it.
