Hi all. I had a Megaflo Heatrae Sadia installed about 4 years ago and it's never run right since it's installation. At this time of year is when i realise it's not working correct. When i turn on the heating manualy for a bit extra heat by the themostat, sometimes it comes on, sometimes it does'nt. I've had the rep from Worcester (Greenstar 30CDi System) out to check everything is ok with the boiler itself and he gave it a thumbs up saying it's not wired in correctly. I'm a builder and I've had two different electricians here who are our usual contractors but to be honest, i don't think they have a lot of experience with this kind of system. It was setup in the beginning to have upstairs and downstairs on seperate wireless thermostats, but since we couldn't get this working correctly i told them just to put it all on one thermostat. It's still not working right. As a bricklayer by trade, it's all a bit complicated to me... but it seems to be because it has 3 port valves which seems to be causeing problems for the sparkies i know.
Anyway, I'm looking for an electrician (Durham area)who is experienced with these systems to have a go and see if they can get it running correctly once and for all. Or if anyone knows where i can get hold of a wireing diagram for the electricians for a 3 port valve system.
Many Thanks
Mark.
Anyway, I'm looking for an electrician (Durham area)who is experienced with these systems to have a go and see if they can get it running correctly once and for all. Or if anyone knows where i can get hold of a wireing diagram for the electricians for a 3 port valve system.
Many Thanks
Mark.