Microgenus 27 MFFI

[mandy79]

hi all
Please can any one help with my question i have the above boiler and the pressure is low and now there is not much heat coming to the radiators please could someone tell me how to get the pressure up the only instructions we have are the servicing and instillation
thanks
mandy

 

[gas4you]

Don't know these very well, but look under the boiler for a silver braided flexible pipe, the filling loop. At each end there will be an isolating valve. Open both and let the pressure rise to just over 1 Bar.

if the boiler has an internal filling loop it will be located under the bottom of the boiler. The same filling technique is used.

Look in the servicing/installation guide for filling loop.

 

[mandy79]

thank you so much our heating is now working