mira advance atl thermostatic electric shower

Joined
27 Sep 2020
Messages
2
Reaction score
0
Country
United Kingdom
I bought and got it installed Mira advance atl thermostatic Electric shower in 2017.
Suddenly on front panel its giving low indicator sign and water supply sign. Don't see any information about this indicator on the manual.
Just thinking is it low pressure of water to the shower or something is blocking the water supply inside the shower.
 

Attachments

  • Mira Issue.jpeg
    Mira Issue.jpeg
    136.8 KB · Views: 1,504
Sponsored Links
Have you checked your cold supply? Is there a noticeable drop, eg a burst main? Have you carried out any work where the stopcock isn’t open fully?
 
There is no worked carried out and neither any drop in pressure.
Cold Water tap(inside bathroom) next to electric shower has good pressure. I have gravity tank water supply.
Do you think there is blockage inside the unit?
 
Sponsored Links
Do you think there is blockage inside the unit?

It’s possible, but id be checking the head/hose 1st. So remove hose from base of unit and try this, if it’s comes on without these attached then there’s an issue elsewhere. If it runs fine, then head/hose is restricted.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top