I fitted a mixer shower using the Cold water tank and teed off the hot water tank. Despite there being a head betwwen the cold tank and the shower head the flow is rubbish. it does get a lot better when the mixed it turned to cold. Any ideas.
MIXER SHOWER PROBLEMS
- Thread starter jabberwocki
- Start date
Sponsored Links
yes you need a pump to get a descent flow.
Thanks thought that would be the case. Although there are many posts saying the flow would be ok thats not my experience. Would 1.5 bar pump be ok as I am not bothered about being relentlessly bombarded( My daughters house has pumped showers and they use a ridiculous amount of water and make you feel like the skin is coming off)
Thanks again
Thanks again
Sponsored Links
if your shower head is only about 1m from your cws in loft then yes you won't get a good pressure.
1.5 bar will be ok.
but take the hot feed from a surrey flange etc, not from the existing hot feed.
1.5 bar will be ok.
but take the hot feed from a surrey flange etc, not from the existing hot feed.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
