Mixing aggregate with self levelling compound

[Teggs]

Can anyone tell me what type of aggregate I should be mixing with self levelling compound to enable me to boost the maximum allowable depth above 6mm.

The packagng says fine aggregare should be suitable on a 1:1 ratio with a latex solution added.

Any advice would be appreciated.

Mark

 

[Softus]

See this topic:
//www.diynot.com/forums/viewtopic.php?p=138144#138144

 

[simonh1024]

I use fine shingle stones from my local builder centre. The level compound packet you have should have an advise telephone number on it.