What implications are there if MOT type 1 is laid and flattened inside formwork? I know it's unorthodox, but I have 150mm planks for shuttering, and propose 100mm concrete base on top of MOT type 1.
MOT type 1 inside formwork?
- Thread starter stoobloo
- Start date
Sponsored Links
No. 25-50mm above ground level,
Sponsored Links
Are you talking about 100mm of concrete on top of 50mm MOT? If so the MOT is all below ground level.
Sounds fine to me. Get a compactor, should give a good firm base for it.
I'd put a polythene sheet over the MOT, to stop it sucking the life out of the concrete.
Sounds fine to me. Get a compactor, should give a good firm base for it.
I'd put a polythene sheet over the MOT, to stop it sucking the life out of the concrete.
Yes 100mm concrete on top of 50mm MOT. but have 150mm boards for shuttering...
Once finished 80mm concrete (and the MOT) will be below ground level. Yes using a DPM over the MOT before concrete.
Once finished 80mm concrete (and the MOT) will be below ground level. Yes using a DPM over the MOT before concrete.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
