Forgot to mention this. Check out Energy Savings Trust Grant Search for special deals on insulation.
Ah...seems like I left the floors at 1. I've re-done it and it reads as follows
The WINDOW heat loss is 0.01 kW
The WALL heat loss is 7.57 kW
The ROOF heat loss is 2.11 kW
Note down the kW readings (or print this page) then press your
browser's Back button.
If better insulation is possible, make selections with higher levels of insulation,
then calculate again to see the effect on the boiler size required.
By spending money on, say, more loft insulation you may save money on the
price of the boiler, and you will definitely save money FOREVER on your heating bills.
The required boiler output is 15.73 kW
########################
I used the calc of 0.17 there.
Floors 2
Length - 9m
Width - 8.3m
Height 2.4m
Living in Lanarkshire Scotland. Microbore, that sounds familiar. Is that the norm these days?
I've just registered with the energy saving trust and spoke with them on the phone. I've arranged for a company to estimate for cavity wall insulation.
Rad results:
Rad 1 1956 6673
Rad 2 1268 4327
Rad 3 691 2358
Rad 4 1127 3846
Rad 5 307 1648
Rad 6 564 1923
Rad 7 900 3071
Rad 8 600 2047
Rad 9 600 2047
Rad 10 400 1365
Rad 11 564 1923
Rad 12 500 1706
I'm hoping you know what to do with these figures because I don't! I've also just found out that I have 12 rads and not 11.
Sorry for the inaccurate info earlier. Hopefully this will be ok.