M
mevtickin3
Hi guys, after a bit of help...
I have a Danfoss CP715 Electronic Programmer, and this morning I noticed that the time has stuck at exactly 06:30, about 10 minutes later the display went blank but left both red led's on and the boiler continued to fire. It remained like this for another 10 minutes, when I decided to switch it off at the spur.
I tried to reset the device using the front r/s switch but I can't get it to click for some reason?
Any ideas what's wrong with it?!?
It must have power, as the red led's are on for heat and water, just the LCD is off.
I have a Danfoss CP715 Electronic Programmer, and this morning I noticed that the time has stuck at exactly 06:30, about 10 minutes later the display went blank but left both red led's on and the boiler continued to fire. It remained like this for another 10 minutes, when I decided to switch it off at the spur.
I tried to reset the device using the front r/s switch but I can't get it to click for some reason?
Any ideas what's wrong with it?!?
It must have power, as the red led's are on for heat and water, just the LCD is off.