I need help With two diy projects first I got an Adt wireless domonial alarm with pirs ,sounders and keypad etc I can set the system in part set using codes or tag but cannot full set ( there is no sound just a 1 min countdown ) at the end of that it just says cancelled .also when I go into codes it ask for master code which I don't have so is there anyway of defaulting system .the second one is I also got a Honeywell le sucre wireless system me thinking I could use the pirs and sounders from the domonial if I couldn't use it however you need to log into Honeywell 2.0 but when I try to create an account it asks for a 20 digit code off the tag reader ( which I can't find ) so can't add anything to the system any help would be appreciated thanks .
Need help from alarm engineer
- Thread starter Neil a
- Start date
Best of luck with that !
Pretty much... One good thing is that if you get a Galaxy panel with a C079 RF portal, then the wireless devices are compatible. Not sure if there's anyone here who can help with the Sucre system. I've never used them, as like the wireless devices, they were French design and the documentation is awful.
not good practice to bring up such old threads, the manual should have the default codes in, the default procedure maybe in the manual if the panel isnt locked.
the default procedure wont work.
depending on the panel involved you may be able to default codes only (preferred option) or the entire panel, some panels have a procedure for you to get into engineering without a code, which can then be changed.
Some panels give a success beep or error beep depending on it being successful or not.
Some give indications that the NVM is being defaulted.
so depends on the panel as to how you would know.
depending on the panel involved you may be able to default codes only (preferred option) or the entire panel, some panels have a procedure for you to get into engineering without a code, which can then be changed.
Some panels give a success beep or error beep depending on it being successful or not.
Some give indications that the NVM is being defaulted.
so depends on the panel as to how you would know.
dont make agility 3 anymore haven't done for a while, the agility 4 is the current and has been for a while although Risco arent pushing the Agility much, seem to be pushing the lightsys variants.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
