Nest /Hive Glowworm Flexicom 30cx

[Andy james]

Hello I have a newish Flexicom 30cx I fitted a climbapro rf 2. I'm. Now looking to get a nest but I'm. Not sure if this is going to work with my Flexicom as I know the ebus is strange but I'm think the two wire to the nest could go in the 2 and 3 slot on the best and run it a a L + N.

 

[petit_pablo]

Remove the wiring from 24v connections.
For hive or nest use the L-N-R-F terminals

 

[Andy james]

So feed the nest with a 240 supply and R and F into 2 and 3 cheers

 

[petit_pablo]

If nest common and NO are 2 and 3 yes. I've never fitted a nest personally.

 

[jackthom]

So feed the nest with a 240 supply and R and F into 2 and 3 cheers

The Nest Needs Live and Neutral taken from the boiler terminals.
The R terminal is the boiler switched Live so you need a permanent Live connected to the Nest 2 and connect boiler R to Nest 3.
The permanent Live on Nest 2 can either be a short wire link from the Nest L terminal or a wire from the L terminal in the boiler.

 

[OwainDIYer]

and the outer sheaths of the cables should be under the cable clamps.