New BEKO cooker connection.

[allex50]

6mm cable sticking out of the wall needs terminating for the cable (H05BN4-F or H07RN-F)) from the cooker (Cooker isolator already in place). Does anyone sell the full WAGO kit I need? It seems one needs to select all the separate parts. Also need to crimp the 6mm wires? Can't see them on Screwfix or B&Q.

 

[blup]

This should enable you to terminate supply and load in the same terminals

https://www.screwfix.com/p/mk-logic-plus-45a-unswitched-cooker-outlet-plate-white/16686?tc=OT8&gclsrc=aw.ds&gad_source=1&gad_campaignid=19823510362&gbraid=0AAAAAD8IdPwB5nKf28EI0CaQb1QsIOjma&gclid=EAIaIQobChMI4O-g7aLRkwMV7KVQBh2GQRDtEAQYASABEgIl1PD_BwE

 

[jj4091]

Please supply a pic of what you currently have showing the isolator and the cable sticking out of the wall. As blup says you need a cooker oulet plate near the bottom of the wall where the cooker is installed.

 

[blup]

A male spade type connector on the flex will help when fixing to the 6mm conductor in the terminal.

Spade Type Connectors Male

www.toolstation.com

 

[allex50]

Thanks all, I'll dig the cable back out and up the wall a bit so that it aligns with the back of the new built-in unit which is a BEKO cooker requiring a 16A supply so the existing trip will need downrating a bit.

 

[endecotp]

the existing trip will need downrating a bit.

No, it doesn’t work like that.

Ask in “Electrics UK” for advice.