I have just had an old boiler replaced with a Broag Avanta 24V and new controls & cylinder
View media item 17211 [/img] View media item 17213The system is noisy and fills with air. pipe at top and goes to left is 22mm combined F&E, straight down from there is pump, clip on temp gauge, CH valve, bypass. HW valve is to right. Separate valves were fitted at my request as heating may be split into zones.
There are no TRV's
Currently installer is saying all is ok and blames other parts of rad system for air and noise.
No problems with air or noise prior to the boiler change.
Any obvious problems visible?
View media item 17211 [/img] View media item 17213The system is noisy and fills with air. pipe at top and goes to left is 22mm combined F&E, straight down from there is pump, clip on temp gauge, CH valve, bypass. HW valve is to right. Separate valves were fitted at my request as heating may be split into zones.
There are no TRV's
Currently installer is saying all is ok and blames other parts of rad system for air and noise.
No problems with air or noise prior to the boiler change.
Any obvious problems visible?