- Joined
- 11 May 2007
- Messages
- 28
- Reaction score
- 0
- Country
please help. we have just had a new cylinder and have hot water again but cannot seem to get the radiatiors hot. The one's upstairs are but i think that it is probably just convection from the cylinder causing that. Have vents on the pipes and have tried bleeding radiators.
we have back fed the system by fitting a hose to the drain on one of the rads and filling by an out side tap and venting it through the f&e . the 3 port valve is new but is it is not wired in and is in the heating and hot water position. i have added more that enough vents to they system . the system has been bled and still nothing
Please help
we have back fed the system by fitting a hose to the drain on one of the rads and filling by an out side tap and venting it through the f&e . the 3 port valve is new but is it is not wired in and is in the heating and hot water position. i have added more that enough vents to they system . the system has been bled and still nothing
Please help