Just spent the last 2 hours looking through previous posts, but still not sure of answer to the problem.
Moved into a new house today, which has had the system drained down for the past 2 months. (Now refilled - should I add inhibitor?)
Boiler is a Baxi Solo 2 50RS.
CH works ok, but no hot water.
When I open a hot tap, the main burner does not ignite and the water runs cold.
Pump is running OK.
There is a Honeywell valve with a lever on the bottom, next to the pump. I can move the lever, but not sure what position it should be in.
Is it the valve, or something at the boiler end?
many thanks for any advice, Dave
Moved into a new house today, which has had the system drained down for the past 2 months. (Now refilled - should I add inhibitor?)
Boiler is a Baxi Solo 2 50RS.
CH works ok, but no hot water.
When I open a hot tap, the main burner does not ignite and the water runs cold.
Pump is running OK.
There is a Honeywell valve with a lever on the bottom, next to the pump. I can move the lever, but not sure what position it should be in.
Is it the valve, or something at the boiler end?
many thanks for any advice, Dave