I'm currently experiencing some problems getting hot water. I have an 's' plan indirect system (2 x 2 port valves), my mrs said the hot water got slightly better when she turned up the room stat and the stat on the boiler, although as i understand it, this shouldnt have any effect on the hot water, either way its not working at all now anyway (and to top it all off the immersions been knackered for a while now, so i'm gonna change that when i get this sorted). I have checked both the 2 port valves and they are piping hot in both directions when calling for heat from the time clock, the pumps running and the cylinder stat was set to 70'c (i believe this is too high anyway) but no heat is coming from the draw off on the top of the cylinder, I'm capable of changing any parts if need be but just a bit stuck as to what it might be. Possibly the cylinder stat is knackered? any help would be appreciated. Cheers
No hot water
- Thread starter mario69
- Start date
Sponsored Links
forget the heating
when the programmer calling for heat does the valve open and boiler and pump fire up ?
when the programmer calling for heat does the valve open and boiler and pump fire up ?
Yeah, everythings firing up as it should and the valves are opening as they should, but still no heat from the draw off...
Sponsored Links
as said the draw off pipe from the top of cylinder is it hot or cold.
the draw off is cold
how longs this been going on ?
about 5 days or so, didnt know any earlier as been away and mrs didnt tell me, cant really feel heat in cylinder as has foam covering
have any of the loft tank overflows been running ?
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
