- Joined
- 20 Mar 2017
- Messages
- 16
- Reaction score
- 0
- Country
Hi all... Suggestions please.
After recently making alterations to the 28mm flow and return from the boiler to cylinder I now have no hot water. Heating is fine.
Pipes are hot from the flow and warm from the return up to the first floor, but not much above that.
I've checked for airlocks and pushed water through the vent by the F&E tank.
Boiler is an Ideal Mexico Super 460FF if that helps at all.
Iain
After recently making alterations to the 28mm flow and return from the boiler to cylinder I now have no hot water. Heating is fine.
Pipes are hot from the flow and warm from the return up to the first floor, but not much above that.
I've checked for airlocks and pushed water through the vent by the F&E tank.
Boiler is an Ideal Mexico Super 460FF if that helps at all.
Iain