- Joined
- 11 Apr 2018
- Messages
- 6
- Reaction score
- 0
- Country
Good morning, thank you in advance for your help. I have recently purchased a texecom v4.02 firmware wireless house alarm, long story short, I have been let down by alarm fitter, so am trying to install it myself. I have fitted the control panel to the wall, fitted the battery in the sequence in said in the manual, red wire 1st then black wire 2nd, holding down the default button. The alarm sounded, so pressed 1234 as per the instructions. The alarm stopped, but now I have this fault on the wireless keypad, ( No ricochet network found). I have stupidly realised that I have connected the keypad in the wrong order as per the manual. I have tried a number of times taking the batteries, then connecting the engineering cable supplied and re-fitting the batteries and still getting the same fault....
Thanks guy's
Thanks guy's