Ocean washing machine wmp 1300a

[craigmorejoe]

Hi

First post on here. Found the forum while trawling the internet for info on the above mentioned.
Started having problems with the machine not running in any hot water, its a two pipe machine. Faulty fill valve on the hot replaced.
As it had been running for a while with only cold water and because its 9 years old I reckoned I would replace the mouldy drum seal.
So far, no joy in finding a replacement door seal. Would appreciate any info on parts sources for this machine. Only one I can find is an ocean wmp1500a which I imagine could be the same as my machine with maybe a larger spin.

So any help would be appreciated, contact nos or web addresses etc.
Work alot on oil fired boilers so hopefully I'll be able to help some people on here also.

Thanks in advance

Joe

 

[craigmorejoe]

Not looking good so far, no replies yet.

Hopefully somebody will give me some leads.

Thanks

Joe

 

[cakeman]

Parts for this are Brandt & Blomberg , Fagor & DeDietrich

was it from currys ??

does the door seal have a rectangle join where it meets the water in from the detergent drawer

 

[craigmorejoe]

Not from curry's, bought from a euronics retailer in N ireland, donaghy bros.
I'll check when I get back to base camp on the shape of the door seal.
Turned up a part no: 55X2340 or DS55X2340UK so i'll try and look up suppliers or if anybody else has ideas.

Thanks for the reply and any future help.

Joe

 

[cakeman]

2 options

new part £72

http://www.partmaster.co.uk/cgi-bin/search.pl?query=55X2340&frmSFinder_headerSubmit=Search

or try a cheaper option

http://www.casaparts.co.uk/