Oil boiler gasket

[MickieMonday]

Hi, Heating oil is weeping slowly from the location shown in the picture, which I presume might be where it is injected into the combustion chamber. I have not tried to disassemble it yet. I expect that a gasket might have broken down. My question is whether it is possible to get a replacement for a unit this old?

Alternatively, I could make one. What material would you specify for an oil tight gasket?

Any other suggestions or comments will be gratefully accepted.

Many thanks, Michael.

 

[MickieMonday]

 

[Exedon]

The part you have indicated is the oil pump.
If its pump itself leaking new pump.
Will need a competent oil engineer with test equipment to set up.