Oil Tank Pipe

[10051550]

Hi Guys,

I have an atlas 2500l tank I need to move , rebed the foundations and put back.

It's nearly empty so almost ready to go

The plastic coated oil pipe that connects to the tank appears to be just pushed on , which I doubt .... is it usually swagged on ?

Thanks in advance for all replies View media item 34273 View media item 34274 [/img]

 

[denso13]

It is in a compression fitting i.e. nut and olive. Loosen the nut to remove.

 

[10051550]

Sounds to easy !

Unscrewing the nut will make the fitting comming off turn in the pipe presumably ?

What about re-assembly , use something like Hylomar Universal Blue Gasket Sealant ?

 

[denso13]

Unscrewing the nut will make the fitting comming off turn in the pipe presumably

Sorry, not sure I understand. The nut will loosen but the pipe won't turn. You can reassemble with some sealant but it's not required if done properly.

 

[10051550]

penny dropped ! many thanks

 

[algas]

Plug or tape over the hole in the pipe & the valve so you dont get any muck or water in.

 

[Boilerman2]

By the way those slabs should be set onto at least 100mm of concrete as per BS!!